Furuno DS-60 speed log: wind, GPS SOG and COG not shown, no alarm
EL-0083 · Solved · rating 0 · works for 0 engineers · occurred 20 Aug 2025
Source: /cases/el-0083
Symptoms#
- The speed log stopped showing wind.
- After the input wires were tightened, GPS SOG and GPS COG also disappeared (dashes on the display).
- No alarms on the panel or on the screen.
- All other bridge equipment showed wind, SOG and COG normally.
Checked#
| Check | Result |
|---|---|
| 6-pin input plug (TB2, IEC 61162 inputs) | Wires OK |
| Signal LEDs above the plug | Blink with the plug in, go off with it out — normal |
| Full restart of the whole system | No change |
Diagnosis#
After the signal was lost, the input format setting had changed to IEC 61162.
Fix#
In the service menu, set the input format back to NMEA.
Result#
COG, SOG and wind are shown again.
Comments · 0
No comments yet.