Doppler speed log: water track vs bottom track
EL-0151 · Knowledge · rating 0 · occurred 13 Jan 2025
Source: /cases/el-0151
Notes#
Water track and bottom track on a Doppler speed log use the same Doppler principle; the only difference is the surface that reflects the signal. This note covers how the log works in each mode.
| Bottom track | Water track | |
|---|---|---|
| Reflecting surface | The seabed | Water layers or plankton in the water under the ship |
| How it works | The instrument on the ship's bottom sends a beam of a set frequency down to the seabed. The seabed reflects it back, and the log works out the ship's speed from this reflection. | The log uses the frequency shift of the reflections from the water to work out speed. |
| Reading | Speed over ground. It should agree with the GPS speed over ground. | Speed through the water. |
| Limit | In deep water the seabed reflection gets weak (for example at 200 m). | In very cold, clean water the reflections may be very weak and hard for the log to pick up. |
What this note doesn't cover: faults, alarms, settings, accuracy, which mode to choose, automatic switching between modes, maintenance and calibration.
Comments · 0
No comments yet.