Log inJoin

Main engine turbocharger surging: causes and prevention

TurbochargerMain Engine

Notes#

I wanted to know what turbocharger surging is and how to prevent it. One other engineer answered, and I accepted that answer. This is general guidance. It is not a real fault case. No engine or turbocharger maker or model, no readings and no alarms were given.

What surging is (as the other engineer described it)

  • In their view, surging happens when the exhaust gas side pressure rises above the scavenge air pressure. Backpressure then builds up in the turbocharger.
  • How you notice it: the turbocharger makes noise or vibrates, or both. Its RPM swings up and down fast.
  • Note (my own, not from the answer): surging is more often described as a compressor stall, where air flow reverses on the air side. The answer I got did not cover this.

Possible causes given in the answer (the list was not complete)

  1. Power not balanced between the main engine cylinders.
  2. Turbocharger parts that are dirty or damaged: compressor wheel, bearings, nozzle ring, turbine wheel.
  3. Faults in the scavenge air system: air cooler clogged or with damaged tubes, damaged mist catcher fins, scavenge air temperature too high.
  4. Exhaust valve problems (no details given).
  5. Fuel system faults: fuel valves that do not work properly, worn plunger and barrel in the fuel pumps (where the engine has them), fuel quality, fuel preheat temperature not correct.

Prevention and checks suggested by the other engineer

  1. Wash the turbocharger, both dry and wet, at the intervals set by the maker.
  2. Clean the turbocharger intake air filter.
  3. Monitor the pressure drop across the air cooler. When it shows the cooler is dirty, clean the cooler with chemicals.
  4. Inspect the mist catcher often to judge its condition.
  5. Evaluate main engine performance. If you see high exhaust gas temperature or a Pmax/Pcomp deviation, find the cause at once. The engine may be out of balance, with one cylinder giving less power than the others.
  6. Do not change main engine load suddenly.
  7. Follow the maker's manual for turbocharger maintenance. Give special care to the bearing replacement intervals.
  8. Inspect the grating before the turbocharger regularly. It should be clean, with no deposits.
  9. Inspect the scavenge spaces often. Make sure there is no heavy carbon in the scavenge ports. The piston rings should be intact, and the flaps in the air receiver should have no damage.
  10. Keep the exhaust gas boiler clean and free of soot. A dirty boiler can often cause backpressure.

Not covered in the answer I got

  • No numeric limits: no pressure drop values, wash intervals or temperatures.
  • No maker service letters or class notices.
  • No immediate action to take when surging happens.
  • No confirmed real case with a root cause and a fix.

Comments · 0

No comments yet.

Sign in to comment, vote and confirm fixes.Sign in