MAN B&W ES main engine: precautions for long low-load running
EL-0165 · Knowledge · rating 0 · occurred 05 Jul 2022
Source: /cases/el-0165
Notes#
MAN Service Letter SL09-511/MTS gives 10% load as the lowest load for continuous running of a MAN B&W ES two-stroke main engine, and running in this range needs precautions. These are the precautions I take.
Service letter: keep load-up of the engine as small as possible. The instructions in SL09-511 always apply. I only have the letter as a picture, so I don't list its items here; read the letter itself.
My precautions at low load:
- Auxiliary blowers: do not run the engine at the scavenge air pressure where the blowers start and stop by themselves. Repeated automatic start and stop can damage the blower electric motors. Switch the blowers to manual and keep them running. Grease the motor bearings often through the grease nipples. This depends on the bearing type (open or closed); I don't have which type needs it.
- Turbocharger: clean with nutshells at the interval the maker gives. Also load up the engine from time to time to stop TC fouling. I don't have a load or frequency for this. Note that load-up should also be kept small, so the two points need to be balanced.
- Scavenge inspection: do one at the first good chance and check the general cylinder condition. Clean the under-piston space and the drain pipes well. Low load can make more sludge. Sludge can give high under-piston temperature and scavenge fires.
- Monitoring: check the ME parameters often in CoCoS. Look at the position in the load diagram to see if the engine runs light propeller.
- Exhaust gas boiler: clean it often. More soot can collect at low load.
- Cylinder condition: take drain oil samples often. Test them with the onboard kit, if the ship has one. Watch the iron (Fe) content.
- Cylinder oil: at
10-15%load the engine runs below the breakpoint. Cylinder lubrication then depends on RPM, so cylinder oil consumption goes up.
What this note doesn't cover: the engine model or bore, cleaning intervals, the blower switching pressure, and how long the engine may run at low load.
Comments · 0
No comments yet.