When to replace a gyrocompass gyrosphere: maker interval vs real life
EL-0159 · Knowledge · rating 0 · occurred 08 Dec 2022
Source: /cases/el-0159
Notes#
Yokogawa and Tokyo Keiki both recommend a new gyrocompass gyrosphere (sensing element) every 3 years, but real service life varies a lot by maker. This note covers how I decide when to replace one.
Maker recommendation. 3 years for both Yokogawa and Tokyo Keiki. Makers can change this policy at any time, so I check the current recommendation from the maker before planning a replacement.
Field experience (not maker data). What I have seen in service:
- Yokogawa gyrospheres often fail after
3to5 years. - Tokyo Keiki sensing elements often last about
10 yearsor more.
This is my own experience, not a maker figure.
Making the gyrosphere last longer. A yearly service that follows the maker's manual step by step, done by a maker-approved service company with a good record and skilled staff.
One gyro or two.
- On a ship with two gyrocompasses, a "replace only when it fails" policy is easier to apply. The chance that both gyros fail at the same time is very small.
- On a ship with only one gyro, there is no backup, so following the maker's replacement interval is the safer choice.
What this note doesn't cover.
- Fault signs for the end of gyrosphere life, for example settling time, heading error, supporting liquid condition, or phase / follow-up current readings.
- Maker service letters or document numbers.
- A real failure case.
Comments · 0
No comments yet.