MAN ES two-stroke: why the piston skirt has bronze bands
EL-0180 · Knowledge · rating 0 · occurred 23 Oct 2024
Source: /cases/el-0180
Notes#
The bronze bands on a MAN ES 2-stroke main engine piston skirt are there to keep adhesive wear on the cylinder liner low when the skirt touches the liner wall. This note explains how they work and where the design is heading.
How the bronze bands work
- The layer on the skirt is made of bronze bands fitted on the piston skirt.
- The bands stand out from the skirt surface. I don't have a figure for the height.
- Heat makes the piston crown grow. The bands can then rub against the cylinder liner wall.
- Bronze is a softer metal than the cast iron of the liner. So contact through the bronze bands keeps adhesive wear on the liner low.
Design trend
MAN ES main engines are changing to a barrel-shaped skirt with a molybdenum coating. The reference is MAN ES Service Letter SL2023-746. I don't have the engine types or retrofit conditions; read the service letter for these details.
Open point: bronze ring deformed and came off
I have seen a case where the bronze ring on a piston skirt was deformed and had come off. I have no refit procedure for this:
- no procedure, tools, process or product for refitting;
- no inspection limits;
- no reason why the ring came off;
- no engine model, running hours or liner condition.
For this problem, follow the maker's instruction manual and ask MAN ES.
What this note doesn't cover
Band sizes, clearances, band height, wear limits, inspection intervals or engine types. My only references are the maker (MAN ES) and SL2023-746.
Comments · 0
No comments yet.