Ballast pump coupling stuck: removed without heat using an extractor and jack

PumpsBallast System

Contents
  1. Symptoms
  2. Checked
  3. Diagnosis
  4. Fix
  5. Result
  6. Comments · 0

Symptoms#

A stuck coupling flange on a tanker ballast pump can be pulled off without heat using a home-made extractor and a hydraulic jack. That is how we freed ours.

  • The ballast pump sits in the pump room of our tanker.
  • The coupling flange would not come off the pump shaft.
  • Heat was not an option, because the pump is in the pump room.
  • I don't have the pump maker, model or size, the shaft size, or the coupling size and type of fit.

Checked#

CheckResult
Is heating possible?No. The pump room on a tanker does not allow it.
Room around the couplingVery little. There was no space for a normal tool, so we made our own.
No-heat options I consideredSoaking the joint with penetrating oil and using vibration; a 20 ton hydraulic jack.

Diagnosis#

I don't know why the flange was stuck. With heat ruled out, the flange had to come off by force. The answer was a strong mechanical pull, using a tool built to fit the small space.

Fix#

  1. We built an extractor, because there was very little room.
  2. We bolted the extractor to the coupling flange.
  3. We placed a 10 ton hydraulic jack inside the extractor. The jack pushed upward and drew the flange off the shaft.
  4. The bolts broke again and again under the very high tension.
  5. After this, we planned to weld plates onto the extractor to make it stronger. I can't say whether the plates were fitted for the pull that worked.

I don't know whether oil or vibration was also used. I have no jack pressure and no drawing of the extractor to share.

Safety: welding is hot work. Do any welding on the extractor outside the pump room, in an approved hot-work area. Keep everyone out of line with the bolts and the jack while it is under load, because a bolt that breaks can fly out.

Result#

The coupling was removed. I have no record of any damage to the shaft or flange, and I don't know how the coupling was fitted back.

Lesson: where heat is not allowed, such as a tanker pump room, a home-made extractor with a hydraulic jack can free a stuck coupling. The extractor and its bolts must be strong enough for the jack force. In our case the bolts failed several times.

Comments · 0

No comments yet.

Sign in to comment, vote and confirm fixes.Sign in