Log inJoin

Main engine scavenge drain tank level rising: piston crown O-ring leak suspected

Main Engine

Contents
  1. Symptoms
  2. Checked
  3. Diagnosis
  4. Fix
  5. Result
  6. Answers · 0

Symptoms#

The level in our main engine scavenge drain tank keeps going up, and I suspect system oil leaking into the scavenge space from the piston crown O-rings.

  • The engine has a scavenge space, so it is most likely a two-stroke crosshead engine. The engine type is not stated.
  • I have no readings, no rate of rise, no alarms and no oil sample results to share.

Checked#

CheckResult
Scavenge drain tank levelRising all the time
Analysis of the drain (system oil, cylinder oil, fuel or water)Not reported
Inspection of the scavenge spaceNot reported

Diagnosis#

My working theory is that the extra drain is system oil getting into the scavenge space, with the O-rings on the piston crowns as the probable source. An inspection of the scavenge space with the main lube oil pump running should show if this is true.

The stuffing boxes could also be the cause. I have not checked this.

I have not confirmed the real cause.

Fix#

These are the steps I plan, not a confirmed fix:

  1. Stop the engine and make the scavenge space safe for entry or inspection, following the ship's normal procedure.
  2. Start the main lube oil pump, so system oil circulates.
  3. Look inside the scavenge space at each unit. Check for system oil coming out around the piston crown.
  4. If a unit shows a leak, plan to check the piston crown O-rings on that unit.
  5. Also consider the stuffing boxes as a possible source.

Result#

I don't have the final result yet.

Answers · 0

No answers yet. Seen this before? Your reading could close it.

Seen this fault? Sign in to answer.Sign in