Log inJoin

Propeller shaft earthing device: what it does and why it matters

Propulsion & ThrustersMain Engine

Notes#

A colleague asked me what a shaft earthing device does and why it is important. I work on ships, and this is how I explain it.

Why the device is needed

  • When the shafting turns, the propeller, propeller shaft and intermediate shaft lose electrical contact with the hull.
  • The reason is the lube-oil film in the bearings (M/E bearings and stern tube bearings). This thin film works as an insulator.
  • With the electrical path broken, the hull cathodic protection system cannot protect the propeller and propeller shaft properly.
  • The shaft and the hull are made of different metals. Because of this, a voltage appears between them.
  • This voltage can push current through the propeller shaft, the intermediate shaft and the M/E crankshaft.
  • The current causes spark erosion and deep pitting on the M/E bearing surfaces.
  • Earthing the propeller shaft with a shaft earthing device lowers this risk.

How the device is built

  • Two brushes sit in a brush holder. The brush material is a compound with high silver content and graphite.
  • The brushes run on a copper slip ring that has a solid silver track.
  • The slip ring is fitted on the propeller shaft or on the intermediate shaft.

Maker guidance

  • In my experience, M/E makers always recommend fitting a shaft earthing device. They also recommend keeping it well maintained and in correct operation to protect the bearings.
  • I did not name a maker document or service letter.

Not covered here

  • I added a picture, most likely a diagram of the device. Its content is not described in text.
  • No specific ship, maker, model or fault case is given.
  • No values are given, such as shaft-to-hull voltage limits or alarm setpoints. A monitoring meter is not mentioned.
  • No brush wear limits, replacement intervals, slip-ring cleaning or inspection steps are given.

Comments · 0

No comments yet.

Sign in to comment, vote and confirm fixes.Sign in