Stern tube air seal: risk of losing air supply at deep draft
EL-0190 · Knowledge · rating 0 · occurred 13 Feb 2023
Source: /cases/el-0190
Notes#
Loss of the air supply to a stern tube air seal is a serious condition, because at deep draft the oil head alone may not hold back seawater and seawater may enter the stern tube. Loss of air supply is not common, and the priority is to restore it as soon as possible; in my experience this is usually not difficult.
Why seawater can get in
- Without air, only the lube oil pressure from the tank unit holds the seal. The same tank unit also feeds the forward (engine room side) stern tube seals.
- At a deep draft, the seawater pressure at the seal can be higher than this oil pressure.
- Seawater can then get into the stern tube.
Emergency mode
- If the air flow regulation of the seal fails, or the whole air control unit fails, the stern tube still gets lubrication.
- Oil keeps moving through the stern tube LO sump tank and the gravity tank.
- The pumps of the oil pressure unit keep running and keep the same static head on the seal.
I treat this as an emergency mode. It does not work as well as normal operation, but the ship can still sail safely until the air supply is back. The two points go together: the ship can keep sailing, but at deep draft there is a real risk of seawater ingress. Either way, the air supply must be restored.
What this note doesn't cover
- Seal or air control unit maker and model.
- Air and oil pressure values or limits, or draft limits for safe running without air.
- Alarms.
- Steps to restore the air supply or to find why it failed.
- Maker service letters, class notices, or the outcome of a real case.
Comments · 0
No comments yet.