Search
Cases
Search cases
Clear
⌘K
All
10
Solved
6
Open
0
Troubleshooting
Incident analysis
Procedure
Knowledge
6 cases match
Equipment
All
Main Engine
Auxiliary Engine
Turbocharger
Boiler
Purifier
Compressed Air
Pumps
Fresh Water Generator
OWS & Bilge
Incinerator & Sewage
Refrigeration & HVAC
Steering Gear
Propulsion & Thrusters
Deck Machinery
Ballast System
Electrical
Automation / PLC
Navigation
Fire & Safety
Other
Sort
Best match
Newest first
Highest rated
Most confirmed
Recently updated
Apply
▲
0
rating
0
comments
Main engine piston crowns burnt: long low-load running and bad injectors
Troubleshooting
Main Engine
Burn marks on our main engine piston crowns came, as far as we can tell, from long running at low load together with faulty fuel injectors. I found burn marks on the combustion side of the piston…
Anonymous · 4 y
▲
0
rating
0
comments
MAN MC-C: no combustion in one unit, clogged ball valve at fuel pump inlet
Troubleshooting
Main Engine
·
MAN B&W MC-C
·
Slowdown: exhaust gas temperature deviation, cylinder No.6
Cylinder No.6 on our MAN MC-C stopped firing because the ball valve on the fuel oil inlet to its fuel pump was clogged. It took a long list of new parts before we found it. We reduced main engine…
Anonymous · 4 y
▲
0
rating
0
comments
Main engine: fuel pressure slowdowns, deaeration chamber full of gas
Troubleshooting
Main Engine
Repeated main engine slowdowns on fuel oil pressure. It took about 4 days to find the cause. The deaeration chamber was "boiling" with gas. The gas came into the fuel system through the return line…
Anonymous · 5 y
▲
0
rating
0
comments
Dual-fuel main engine: loud bangs and many alarms when changing over to gas
Troubleshooting
Main Engine
The main engine was started and changed over to gas. Loud bangs from the engine and many alarms.
Anonymous · 7 mo
▲
0
rating
0
comments
Main engine: gas bubbles in the fuel system, fuel pressure jumping
Troubleshooting
Main Engine
Air (gas) bubbles in the main engine fuel oil system. Small bubbles stayed all the time. Fuel pressure was jumping.
Anonymous · 1 y
▲
0
rating
0
comments
Cummins NTA855 emergency generator: speed hunts ±30 rpm after a cold start
Troubleshooting
Auxiliary Engine
·
Cummins NTA855-D(M)
On the first cold start, speed hunted by about ±30 rpm at 1800 rpm (frequency by about 0.5 Hz). After a restart (sometimes the 2nd or 3rd) it ran smoothly, and further starts were fine. A few hours…
Anonymous · 1 y
EngineLog
Home
Cases
Assistant
Library
Log in
Join
Home
Cases
Assistant
Library