Shaft torque meters with strain gauges: calibrate every 6 months
EL-0189 · Knowledge · rating 0 · occurred 24 Jun 2022
Source: /cases/el-0189
Notes#
I recommend calibrating shaft torque meters (shaft power meters) on the propulsion shafting every 6 months, at least those with strain gauges, because regular calibration stops the strain-gauge readings from drifting.
- Strain gauges are often seen as a trusted, well-known technology and called "maintenance free". In my opinion they still need calibration because of the drift.
- I expect torque meters using other measuring methods need some calibration too, since any sensor does. This is my guess only; I haven't looked at specific other methods.
What this note doesn't cover:
- Any maker manual, service letter or class rule behind the
6-monthinterval. - How to do the calibration (for example zero-torque check, shunt calibration, or comparison with engine power).
- Typical drift values or acceptable limits.
- Any real fault case.
The 6-month interval is my own recommendation. Check the maker's instructions for your own torque meter.
Comments · 0
No comments yet.