ME exhaust valve spindle burn-through: common causes
EL-0177 · Knowledge · rating 0 · occurred 21 Jul 2022
Source: /cases/el-0177
Notes#
Exhaust valve spindle burn-through on a two-stroke main engine usually comes from one of a short list of factors, each of which makes the spindle burn away faster and shortens the time between overhauls. This is my checklist for an electronically controlled ME-type engine.
The list applies to conventional engines burning liquid fuel only. It does not cover dual-fuel engines. The same factors apply to camshaft (mechanical) engines and to electronically controlled engines.
Factors that speed up spindle burning
- Fuel injectors that are badly maintained or not operated correctly.
- Long running at low main engine load, or running with scavenge air pressure that is too low. In both cases the thermal load on the spindle goes up.
- Bad fuel oil quality.
- Bad reconditioning or rewelding of the spindle.
- A spindle design or material that is not good enough for the job.
- Wrong timing. I have not specified whether this is fuel injection timing or exhaust valve timing.
Limits of this note
- This is a general checklist of likely causes, not a confirmed diagnosis of a real case. I have no running hours, readings or alarms from a real failure.
- I don't explain here how each factor damages the spindle.
- No limits, temperatures, intervals, inspection methods or maker service letters are given.
Comments · 0
No comments yet.