Search
Cases
Search cases
Clear
⌘K
All
7
Solved
2
Open
1
Troubleshooting
Incident analysis
Procedure
Knowledge
7 cases match
Equipment
All
Main Engine
Auxiliary Engine
Turbocharger
Boiler
Purifier
Compressed Air
Pumps
Fresh Water Generator
OWS & Bilge
Incinerator & Sewage
Refrigeration & HVAC
Steering Gear
Propulsion & Thrusters
Deck Machinery
Ballast System
Electrical
Automation / PLC
Navigation
Fire & Safety
Other
Sort
Best match
Newest first
Highest rated
Most confirmed
Recently updated
Apply
▲
0
rating
0
answers
Stern tube oil: high copper, cooler or pump wear suspected
Troubleshooting
Open
Propulsion & Thrusters
Our stern tube lube oil showed high copper (60-80 ppm); the cause is not confirmed, and I suspect wear in the oil cooler or circulating pumps rather than the bearing. Lab analysis of the stern tube…
Anonymous · 4 y
▲
0
rating
0
comments
Sauer air-cooled service air compressor overheats (105 °C)
Troubleshooting
Compressed Air
·
Sauer Compressors, Air Control 1 controller
The air-cooled service air compressor overheated. The controller showed 105 °C at 5.6 bar.
Anonymous · 2 y
▲
0
rating
0
comments
Two-stroke main engine: jobs to do while stopped in port or at anchor
Knowledge
Main Engine
·
MAN ES ME / MC
This is my checklist of jobs to plan when the two-stroke main engine is stopped in port or at anchor and there is a good chance to do the work. It leaves out inspections that are due by running…
Anonymous · 4 y
▲
0
rating
0
comments
How to inspect the scavenge space on a two-stroke main engine
Procedure
Main Engine
·
MAN ES
This is how I do a scavenge space inspection on a 2-stroke main engine through the scavenge ports in the liner, plus the checks I make for water carry-over. Inspect often. Regular checks let you see…
Anonymous · 4 y
▲
0
rating
0
comments
MAN B&W two-stroke: limits for judging engine performance
Knowledge
Main Engine
·
MAN B&W MC/MC-C, ME/ME-C/ME-B
This is my checklist of practical limits for judging the performance of MAN B&W two-stroke main engines, both mechanical (MC/MC-C) and electronic (ME/ME-C/ME-B). I don't have the source of the limits…
Anonymous · 3 y
▲
0
rating
0
comments
Main engine EGR: deposits and wear depend mainly on fuel sulphur
Knowledge
Main Engine
On a two-stroke main engine EGR (exhaust gas recirculation) system, fuel sulphur content is the main factor behind deposits in the air cooler and scavenge receiver and the amount of drain water and…
Anonymous · 4 y
▲
0
rating
0
comments
Volvo Penta D16: con-rods through crankcase from swapped big-end caps (Wight Sky)
Incident
Main Engine
·
Volvo Penta D16 MH
·
ME2 low LO pressure shutdown; ME4 common alarm
Ro-ro ferry with four Volvo Penta D16 MH high-speed MEs; one or two drive each Voith Schneider unit through fluid couplings. Wight Sky had three catastrophic ME failures in 15 months. The 2017 one…
Anonymous · 4 y
EngineLog
Home
Cases
Assistant
Library
Log in
Join
Home
Cases
Assistant
Library